Everything you need to know about our 4WD Canopy Power Board with 2000W Inverter
The Dunn & Watson 4WD Canopy Power Board with 2000W Inverter are Australian made products powered by Enerdrive. This one-of-a-kind package includes a power board with a fitted 12V DC2DC ePower charger and an ePower 12V battery charger. It also comes with a separate ePower 2000W True Sine Wave Inverter.
This is the 4WD inverter setup you need if you want to travel off road and run all your electrical appliances with ease, including your favourite espresso machine and your microwave. If you’re serious about 4WDing and you need your creature comforts on the road, then you can’t go past this awesome piece of gear.
Size of the Enerdrive 4WD inverter power board
This is a fairly good size 4WD inverter power board, so you’ll need to make sure that you have enough wall space in your canopy for a secure installation. The external dimensions of this 4WD inverter are as follows: 744.43mm in length x 500.00mm in width x 120.15 in depth.
Features of the Enerdrive 4WD inverter power board
The Enerdrive 4WD inverter power board has been designed so that it’s nice and simple to use and is virtually a plug and play installation. Along the one side there are the pre-wired auxiliary ports and a solar input port. This means that if you have a portable solar panel that you want to set up you can just plug it into the solar input port and make your own power on the road.
There’s a dual light bar fitted to the top front of the power board with white light and amber light options (this is a great feature if you don’t have lights in the back of your canopy, because these should be sufficient for your needs). There’s also an alt meter and a row of switches for the light, water pump and three auxiliary ports.
Then there’s the Enerdrive DC2DC battery charger and a separate battery charger with power cord on the front face of the power board. On the other side of the board are inputs for the inverter and battery, as well as inputs for the fridge and your vehicle. That’s not forgetting the two USB charging points so you can keep your smartphone and laptop charged on the road, along with a shelf to store your phone while it’s charging.
The Enerdrive 4WD inverter power board comes with an attached mounting flange with pre-drilled holes. All you need to do is bolt it in place, plug everything in and you are good to go!
- Auxiliary ports
- Solar input port
- Dual light bar
- Alt meter
- Enerdrive battery charger with power cord
- Enerdrive DC2DC battery charger
- Inputs for your inverter, battery, fridge and vehicle
- 2 x USB charge points
- Mounting flanges with pre-drilled holes
Features of the Enerdrive 12V Battery charger
The Enerdrive 12 Battery Charger Is fitted to the front face of the power board. It’s a fully automatic multistage battery charger that can charge up to 3 separate battery banks with each bank charged separately. It’s a programmable unit where each of the three banks can be programmed with a different charge algorithm, whilst the charger is able to regulate its output depending on the loads connected to each of the battery banks. It comes with an easy to use menu, scrolling charger status, silent mode and a temperature sensor.
Features of the Enerdrive 12V DC2DC charger
The Enerdrive 12V DC2DC Charger is fitted to the front face of the power board and is a fully automatic multistage, multi input charger. It gives you the freedom to charge from an alternator linked to a battery or from your solar panels. This means that you have two totally independent DC input sources, the first from your vehicle and the second from your solar panels (the latter via a dedicated MPPT solar regulator). The DC M6 screw terminals also allow you to connect a large battery cable between all power sources. This unit is fully programmable with a temperature sensor and a clear LCD display showing which source is charging the battery, as well as the charger status, voltage and amps.
Features of the Enerdrive 2000W inverter
This easy to use Enerdrive 2000W inverter completes this custom package that will revolutionise your next road trip! It’s a True Sine Wave inverter that delivers the same AC current to you on the road as you get at home via your normal power points. This means that you can plug in all of your appliances and keep them charged, ready for use at any time, day or night. It comes with two regular power points and a 5V USB port, so you can even keep using all your USB powered devices as well. There’s an alarm that sounds if there’s a problem, alerting you before the unit automatically shuts down in cases of an overload or temperature irregularity. This 4WD inverter is a very efficient unit that comes with mounting brackets to keep it safe and secure in the back of your vehicle.
Benefits of the 4WD Canopy Power Boards with 2000W Inverter
Designed and built by Enerdrive, the 4WD Canopy Power Board with 2000W Inverter is a compact power solution for both trades people and 4WD enthusiasts. This 4WD inverter package allows you to operate all of your normal appliances or equipment, on the road, and keep it all charged so that it’s always available when needed. There’s no problem with running out of power with this package!
Basically, the power board lets you keep all your batteries charged using either your vehicle’s engine or solar panels. You can then plug all your appliances and equipment into the 2000W inverter and charge them just as you would at home. Everything is all pre-wired, so it’s literally a plug and play operation. Just plug everything into the right connections and you are essentially set!
The 4WD Canopy Power Board with a separate 2000W inverter is the package you have always wanted and now it’s available at Dunn & Watson. If you’re not sure this is the right 4WD inverter setup for your vehicle, just contact us and we’ll have a chat.