Standard Drawer Slides – 125kg ‘Hercules Series’
Price range: $49.00 through $120.00
Medium duty non locking drawer slides are most widely used for cargo drawers in 4wd’s and vans. These drawer slides when accompanied with one of drawer handles is an ideal choice when building your own drawer system. They offer full extension and come in a large range of sizes to suit most 4×4 drawer system applications.
- Weight capacity: 125kg (Based on 500mm square drawer system as you go longer and wider carrying capacity reduces)
- Material made from: high strength cold rolled steel.
- Cycle tests in manufacture: 50,000 cycles.
- 100% extension: 100% extension
- Each Purchase Contains THE PAIR
- Drawer Slides weigh approximately 492 grams per 100mm (Per Pair)
Please Note: Refer FAQ Tab for common drawer slide related questions
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
*** 1219MM CLOSED / 1219MM EXTENSION – 40KG (LIMTED TIME SALE) ***
Dunn & Watson 125kg Non-Locking Drawer Slides – Heavy-Duty Performance for 4WD and Van Storage Systems
The Dunn & Watson 125kg Non-Locking Drawer Slides are engineered to deliver robust support and smooth operation in demanding environments. These medium-duty slides are ideal for constructing custom drawers in 4WDs, vans, and other utility vehicles. Their full extension capability ensures easy access to stored items, making them a versatile choice for various applications.
Key Features
-
Weight Capacity: 125kg (based on a 500mm square drawer system; capacity decreases with increased length and width).
-
Material: High-strength cold-rolled steel for enhanced durability.
-
Extension: 100% full extension for maximum access.
-
Finish: Zinc-plated to resist corrosion and wear.
-
Installation: Simple installation process for ease of use.
-
Weight: Approximately 492 grams per 100mm (per pair).
-
Cycle Testing: Tested to 50,000 cycles to ensure long-term reliability.
Applications
These drawer slides are commonly used in the construction of:
-
Fridge Slides: Facilitating easy access to portable refrigeration units.
-
Vehicle Cargo Drawers: Organizing tools and equipment in 4WDs and vans.
-
Custom Drawer Systems: Building personalized storage solutions for various vehicles.
Compatibility
The 125kg Non-Locking Drawer Slides are compatible with a range of accessories and components, including:
-
Drawer Handles: For secure and convenient drawer operation.
-
Rear Stoppers: To prevent drawers from overextending.
-
Drawer Dividers: For organized storage within the drawer.
-
Foam & Rubber Seals: To protect contents from dust and moisture.
These accessories can be purchased separately to enhance the functionality and longevity of your drawer system.
FAQs
Are these drawer slides sold by the pair?
Yes, all our drawer slides are sold in pairs. This means you get a left and right hand runner, enough to build one drawer.
Can I run one locking and one non locking drawer slide on my setup?
You must either have both non locking or locking drawer slides. Splitting the pairs doesn't last long term. One locking leaver struggles to keep your drawer square and leads to failure of the locking mechanism in the future and voids your warranty. To counter this issue we have developed a locking leaver bar so one hand can operate both locking leavers at the same time. Please see link for leaver bar kits https://trailerpartsdirect.com.au/shop/drawer-slides/drawer-slide-accessories/227kg-locking-leaver-bar-latch/
How do I disconnect and rec-connect slides?
There is a video demonstration on this page that shows how to disconnect and re-connect your drawer slide. If you are still unsure we recommend you contact our customer service team for assistance before any damage is caused to the runner 1300210549.
Can I lay these flat for install?
No, drawer slides must be installed vertically. Whilst they will operate laying flat, they are not designed to work this way and there is no load rating for a flat mounted install. Installing your drawer slides flat will also void your warranty.
Is the advertised length extended or closed?
The sizes noted are the length of the runners from nose to tail in a closed position. This closed length the leaver tab at the front of all locking slides. These tabs add +30mm to the overall closed length noted.
What size bolts do I use for install?
Bolts used in drawer slide install must have a low profile head. Any bolt head too bulky will result in them colliding inside the slide during the opening and closing process. For 125kg and 227kg series drawer slides Dunn & Watson recommend 5mm bolts and nuts.
Why has my rear stopper fallen off or damaged?
Slamming your drawer can bend the rear fitting holding your stopper in place. Movement of this fitting from excessive force changes the stationary location of the stopper designed to run parallel with the slides. Once this stopper is no longer in its original position it collides with the slides cause pieces of it to beak off and evenly fall apart.
Why is my drawer rattling forwards and backwards?
Slamming your drawer causes your rear stopper to move (Refer FAQ above 'Why has my rear stopper fallen off or damaged?'). The factory location of the rear stopper keeps your runner in a tight position at its true 0% extension, when the rear stopper is moved due to slamming it creates play in the slide to rock between it's original 0% extension point and the gap to the moved stoppers new location. Bending the stopper forward to its original location will eliminate this play.